l = low range [f l to 10 f l ] m = mid range [10 f l to f u /2] u= upper range [f u /2 to f u ] freq. range (mhz) isolation (db) insertion loss (db) above 3.0 db phase unbalance (degrees) amplitude unbalance (db) f l -f u l m u l m u l m u l m u ty p. min ty p. min ty p. min ty p. max. ty p. max. ty p. max. max. max. max. max. max. max. 5-2000 18 16 20 16 18 11 0.6 0.8 0.6 0.8 1.2 1.8 2.0 3.0 5.0 0.2 0.3 0.5 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 1 of 1 MSC-2-11+ 2 way-0 50 ? 5 to 2000 mhz power splitter/combiner plug-in typical performance data electrical specifcations maximum ratings operating temperature -55c to 100c storage temperature -55c to 100c power input (as a splitter) 1w max. internal dissipation 0.125w max. outline drawing outline dimensions ( ) inch mm electrical schematic rev. d m151107 MSC-2-11+ hy/td/cp/am 130921 abcde f .480 .500 .390 .405 .210 .230 12.19 12.70 9.91 10.29 5.33 5.84 g h j k wt .100 .20 .14 .020 grams 2.54 5.08 3.56 0.51 2.3 features ? very wideband, 5 to 2000 mhz ? low insertion loss, 0.6 db typ. ? rugged welded case applications ? cellular ? gps ? instrumentation ? defense communications pin connections sum port 1 port 1 5 port 2 6 ground 2,3,4,7,8 case ground 2,3,4,7,8 MSC-2-11+ total loss 3.0 3.2 3.4 3.6 3.8 4.0 0 400 800 1200 1600 2000 frequency (mhz) total loss (db) s-1(db) s-2(db) MSC-2-11+ isolation 10 15 20 25 30 35 40 0 400 800 1200 1600 2000 frequency (mhz) isolation (db) MSC-2-11+ vswr 1.0 1.2 1.4 1.6 1.8 2.0 2.2 0 400 800 1200 1600 2000 frequency (mhz) vswr #s-vswr #1-vswr #2-vswr frequency (mhz) total loss 1 (db) amplitude unbalance (db) isolation (db) phase unbalance (deg.) vswr s vswr 1 vswr 2 s-1 s-2 5.00 3.55 3.56 0.01 18.23 0.03 1.80 1.64 1.58 50.00 3.55 3.57 0.02 18.58 0.02 1.79 1.65 1.59 75.00 3.58 3.58 0.00 18.62 0.09 1.78 1.65 1.59 125.00 3.58 3.60 0.02 18.72 0.03 1.77 1.66 1.59 175.00 3.58 3.59 0.01 18.82 0.00 1.76 1.66 1.60 275.00 3.58 3.60 0.01 19.08 0.02 1.74 1.67 1.61 450.00 3.60 3.59 0.00 19.80 0.13 1.70 1.67 1.61 550.00 3.61 3.60 0.01 20.38 0.02 1.67 1.67 1.62 700.00 3.61 3.59 0.02 21.58 0.04 1.62 1.66 1.62 1000.00 3.69 3.66 0.03 26.52 0.13 1.51 1.63 1.61 1200.00 3.59 3.53 0.05 34.48 0.14 1.41 1.60 1.60 1400.00 3.66 3.58 0.07 30.65 0.25 1.30 1.55 1.57 1600.00 3.63 3.55 0.08 22.54 0.26 1.18 1.49 1.53 1800.00 3.64 3.54 0.11 17.78 0.45 1.08 1.41 1.45 2000.00 3.80 3.68 0.12 14.47 0.44 1.20 1.33 1.36 permanent damage may occur if any of these limits are exceeded. 1. total loss = insertion loss + 3db splitter loss. case style: a03 +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
